Procedure 6-39 To Clear The Slid; Procedure 6-40 To Enter The Slid - Alcatel-Lucent 7302 Information Manual

6 — ONT management using an ONT interface

Procedure 6-39 To clear the SLID

1 Ensure that the ONT is disconnected from the PON optical cable.
2 From the SLID window, click on the Clear button to reset the SLID to its default
settings.
The SLID clear dialog box opens, as shown in Figure 6-34.
3 Click on YES to reset the SLID. The SLID window is refreshed with the default SLID
settings for the ONT.
4 STOP. This procedure is complete.

Procedure 6-40 To enter the SLID

1 Ensure that the ONT is disconnected from the PON optical cable.
2 From the SLID window, ensure that the SLID value is null or DEFAULT, as shown
in Figure 6-35.
6-58 November 2013
Figure 6-34 SLID clear dialog box
Note — After a SLID is reset, the SLID value is DEFAULT.
Figure 6-35 SLID window
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide