I-010S-P And O-010S-P Standards Compliance; Single-Residence Gigabit Ethernet Ont Sfp; R04.06.70 P-Bit Value Translation; Special Considerations - Alcatel-Lucent 7302 Information Manual

19 — I-010S-P and O-010S-P unit data sheet
GPON BOSA
ODN
19.11

I-010S-P and O-010S-P standards compliance

The I-010S-P and O-010S-P meet the following standards:
•
SFP MSA SFF-8432-compliant digital diagnostics
•
GR-468-CORE
•
G.984.5
•
G.988-compliant OMCI support
•
RoHS
•
TR-156
19.12

Special considerations

The I-010S-P and O-010S-P SFP ONTs have the following restrictions:
•
Auto-negotiation on the GigE Link is not supported. It is set as 1G link.
•
Dying gasp is not supported.
•
ONT upgrade will be slower than normal and could take up to 8 minutes.
•
EMAC traffic loopback not supported.

R04.06.70 p-bit value translation

ONTs running R04.06.70 software will change their behavior; they will not translate
the p-bit values in the downstream direction. In that sense, the ONTs running
R04.06.70 software interpret the request from the OLT in a way that is different from
the OMCI standard. This only applies for R04.06.70.
19-10 November 2013
Figure 19-4 Single-residence Gigabit Ethernet ONT SFP
LDD
CDR/
SERDES
LDD
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Memory
GPON Network
MAC Processor
Controller
Microcontroller
Edition 01
ONT Product Information Guide
Ethernet
SGMII/
MAC
RGMII
i 2 c
23150
3FE 55873 AAAA TCZZA