Naming Designation For Mdus - Alcatel-Lucent 7302 Information Manual

Position in mnemonic
Character after the third
digit
Ending character
(2 of 2)
For example, I-241W-P identifies the following information:
•
I – indoor ONT
•
2 –two POTS interfaces
•
4 –four data interfaces
•
1 –one RF video interface
•
W –Wi-Fi service
•
P –variant
Table
Position in mnemonic
Beginning character
First digit after the dash
Second digit after the dash
Third and fourth digit after
the dash
Fifth digit after the dash
Character after the last
digit
Ending character
For example, O-0881V-A identifies the following information:
•
O – MDU
•
0 –no POTS interfaces
•
8 –eight data interfaces
•
8 –eight VDSL interfaces
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
2 — Part numbers, ordering, and deployment configuration overview
Description
The type of data service supported. The codes for the supported types
are:
•
E for 10/100BASE-T Ethernet
•
G for 10/100/1000Base-T Ethernet
•
H for HPNA (IP over coaxial cable)
•
M for MoCA and 10/100/1000Base-T Ethernet
•
S for SFP ONTs
•
V for VDSL
•
W for Wi-Fi service
The variant
2-4 provides the designation for MDUs.
Table 2-4 Naming designation for MDUs
Description
The series that the product belongs to
The number of POTS interfaces
The number of data interfaces
The number of VDSL interfaces
The number of RF interfaces
The type of data service supported. The codes for the supported types
are:
•
E for 10/100BASE-T Ethernet
•
G for 10/100/1000Base-T Ethernet
•
V for VDSL
•
M for MoCA and 10/100/1000Base-T Ethernet
The variant
November 2013 2-49