Table
Connection
POTS
Ethernet port
Power
Fiber optic port
Note
(1)
The primary path for the earth ground for these ONTs is provided by the 12V Return signal in the
power connector.
25.5
I-110G-P LEDs
Figure
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA
Edition 01
ONT Product Information Guide
Figure 25-2 I-110G-P indoor ONT SC/APC connection
G E 3
G E 4
25-4
describes the physical connections for I-110G-P indoor ONTs.
Table 25-4 I-110G-P indoor ONT connections
(1)
Description
This connection is provided through a RJ-11 port. One POTS connection
is supported.The POTS port supports voice services.
This connection is provided through an Ethernet RJ-45 cable. One
Ethernet connection is supported. The Ethernet port supports both
data and in-band video services.
This connection is provided through a power cable with a barrel
connector.
This connection is provided through a SC/APC fiber optic connector.
The fiber optic connector is located behind a fiber optic port cover on
the ONT.
25-3
shows the I-110G-P indoor ONT LEDs.
25 — I-110G-P unit data sheet
P W R
SC/APC
connector
November 2013
20706
25-5