Physical Connections On I-010G-U Indoor Ont 3Fe 55284 Aa Variant; I-010G-U Leds; I-010G-U Indoor Ont Connections - Alcatel-Lucent 7302 Information Manual

Figure 18-2 Physical connections on I-010G-U indoor ONT 3FE 55284 AA variant
SC/APC connection
Ethernet
connection
The I-010G-U indoor ONT supports data services from one 10/100/1000BASE-T
Ethernet port (CAT5 or better UTP cable). Full-duplex operation and
auto-negotiation between 10 Mb/s, 100 Mb/s, and 1000 Mb/s are also supported.
Table
Connection
Ethernet port
Power
Fiber optic port
Note
(1) The primary path for the earth ground for these ONTs is provided by the 12V Return signal in the
power connector.
18.5

I-010G-U LEDs

Figure
I-010G-U indoor ONT 3FE 55284 AA variant LEDs.
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
L A
N
P O
W E
R
O N
/ O F
F
Power
connection
Power
button
Note —
The I-010G-U indoor ONT is suitable for connection to
intrabuilding or non-exposed wiring or cabling only.
18-4 describes the physical connections for I-010G-U indoor ONTs.
Table 18-4 I-010G-U indoor ONT connections
(1)
Description
This connection is provided through an Ethernet RJ-45 cable. One
Ethernet connection is supported. The Ethernet port supports both
data and in-band video services.
This connection is provided through a power cable with a barrel
connector.
The SC/APC connection is provided through a fiber optic cable.
18-3 shows the I-010G-U indoor ONT LEDs. Figure
18 — I-010G-U unit data sheet
s e t
R e
i t c h
S w
D
L E
Reset
button
LED
Switch
18-4 shows the
November 2013
23696
18-5