Alcatel-Lucent 7302 Information Manual page 375

Parameter Description
(1)
sip_dscp The differentiated services code
point (DSCP) value that should
populate the DS field of SIP packets
sent by the user agent. It is an
integer value in the range of zero (0)
to 63. The default value is the value
configured via SNMP/TL1.
subscribe_p The subscription expiration time that
eriod (1) the client will propose by including it
in an Expires header of a SUBSCRIBE
request. This is a non-negative
integer and the value is expressed in
seconds.The default value is 86400
(one day). (This parameter does not
apply to iConfig requests.)
subscribe_h The number of seconds prior to
(1)
ead_start expiration of a subscription at which
the client sends a SUBSCRIBE request
to refresh the subscription.This is a
non-negative integer and the value is
expressed in seconds. The default
value is 3600 (one hour).
sip_timer_t1 The value of the SIP T1 timer (the
(1) round-trip time estimate). This is a
non-negative integer and the value is
expressed in milliseconds. The range
is 1 to 65535. The default value is
500.
sip_timer_t2 The value of the SIP T2 timer (the
(1) maximum retry interval for a
non-INVITE request). This is an
integer and the value is expressed in
seconds. The range is 1 to 65535. The
default is 4.
sip_invite_ti The INVITE transaction timeout,
(1)
meout designated as Timer B in RFC 3261.
This is an integer. The value is
expressed in seconds. The range is 1
to 65535. The default value is 32
(64*T1).
sip_noninvit The non-INVITE transaction timeout,
(1
e_timeout designated as Timer F in RFC 3261.
) This is an integer and the value is
expressed in seconds. The range is 1
to 65535. The default value is 32
(64*T1).
default_pro Specifies the application server
duct_id product identifier that shall be
assumed for product-specific
communication with the application
server if the application server does
not provide a product identifier. The
value of this parameter is any string
that can be used as the value of a
server or user agent header. The
default is an empty string.
(4 of 7)
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Mode Mode Device
1 2
Y Y Package
A, B, H,
I-240W-
S only
N Y Package
A, B, H,
I-240W-
S only
N Y Package
A, B, H,
I-240W-
S only
Y Y Package
A, B, H,
I-240W-
S only
Y Y Package
A, B, H,
I-240W-
S only
Y Y Package
A, B, H,
I-240W-
S only
Y Y Package
A, B, H,
I-240W-
S only
Y Y All
except
package
C, D, E,
and
I-240W-
S ONTs
5 — VoIP overview
OMCIv2 TL1 and CLI
support? parameters
Yes, XML TL1 using DSCP
takes using
precedenc ent-ontsip-config
e over TL1
CLI using dscp
or CLI.
using
configure voice
ont sip-config
Yes, TL1 TL1 using
and CLI VOICEMAILTO
there is no using
default ed-ontvoiceportsi
value p
CLI using
voice-mail-to
using
configure voice
ont voice-sip-port
No, value N/A
is derived
from
FTP/defau
lt line
profile.
No, value N/A
is derived
from
FTP/defau
lt line
profile.
No, value N/A
is derived
from
FTP/defau
lt line
profile.
No, value N/A
is derived
from
FTP/defau
lt line
profile.
No, value N/A
is derived
from
FTP/defau
lt line
profile.
No, value N/A
is derived
from
FTP/defau
lt line
profile.
November 2013 5-29