Alcatel-Lucent 7302 Information Manual page 982

NTP 152 — Replace an I-110G-P indoor ONT
9 If used, configure the SLID (DLP 129).
10 Verify the ONT LEDs and voltage status (DLP 127).
11 Activate and test the services (DLP 128).
12 STOP. This procedure is complete.
NTP 152-4 November 2013
Note — A new SLID or the old SLID may be used with the replacement
ONT. If a new SLID is used, the new SLID must also be programmed at
the P-OLT using TL1 or a network manager. If the old SLID is used, no
changes need to be made at the P-OLT; see the appropriate P-OLT
Operations and Maintenance Procedures Guide for more details.
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide