Alcatel-Lucent 7302 Information Manual page 949

Intelligent services access manager

Hide thumbs Also See for 7302:

Table of Contents

The following are not supported:

both VLAN translation and VLAN pass-through on traffic

using the same p-bit across the same UNI

VLAN translation when networksidevlan is 4096 and

unisidevlan is 0 to 4094. Upstream traffic is classified

and forwarded as pass-through traffic. Downstream

traffic is not translated to the unisidevlan setting.

Downstream p-bit translation is not supported when the

flow is configured for VLAN pass-through. In this case, the

following applies:

a flow with networksidevlan 4096 and unisidevlan 4096,

will pass downstream p-bits to the UNI unchanged

a flow with networksidevlan and unisidevlan set to the

same value (0 to 4094), will pass downstream p-bits to

the UNI changed to the highest p-bit value specified by

the PQ profile

When all of the following apply, the highest UNI-side p-bit

value defined in the p-bit translation profile is used:

unisidevlan is 0 to 4094 and networksidevlan is 0 to

4094, or unisidevlan is 4096 and networksidevlan is

pbitxlprofid/nm is not 0

p-bit translation is not defined for the downstream

p-bit in the p-bit translation profile

See Operations and Maintenance documentation for the I-040G-R for information on these

Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02

3FE 55873 AAAA TCZZA

ONT Product Information Guide

24 — I-040G-R unit data sheet

networksidevlan

networksidevlan

pbitxlprofid

November 2013