Physical Connections On I-010G-A Indoor Onts; I-010G-A Indoor Ont Connections - Alcatel-Lucent 7302 Information Manual

14 — I-010G-A unit data sheet
The I-010G-A indoor ONT supports data services from one 10/100/1000BASE-T
Ethernet port (CAT5 or better UTP cable). Full-duplex operation and
auto-negotiation between 10 Mb/s, 100 Mb/s, and 1000 Mb/s are also supported.
I-010G-A indoor ONTs also feature an ON/OFF power button for manual shut down
when needed.
Table
Connection
Fiber optic port
Ethernet port
Power
Note
(1)
The primary path for the earth ground for these ONTs is provided by the 12V Return signal in the
power connector.
14.5 I-010G-A LEDs
Figure
14-4 November 2013
Figure 14-1 Physical connections on I-010G-A indoor ONTs
SC/APC
connector
Shutter
Note —
The I-010G-A indoor ONT is suitable for connection to
intrabuilding or non-exposed wiring or cabling only.
14-4 describes the physical connections for I-010G-A indoor ONTs.
Table 14-4 I-010G-A indoor ONT connections
(1) Description
This connection is provided through a fiber optic cable.
This connection is provided through an Ethernet RJ-45 cable. One
Ethernet connection is supported. The Ethernet port supports both
data and in-band video services.
This connection is provided through a power cable with a barrel
connector.
14-2 shows the I-010G-A indoor ONT LEDs.
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Ethernet (GE)
RJ-45
On/Off push button
Edition 01
ONT Product Information Guide
Power
connector
19833
3FE 55873 AAAA TCZZA