Alcatel-Lucent 7302 Information Manual page 415

Parameter Description
etsi_3wc_release_la Specifies the code used to
test reduce a three-way call to a
two-way call by releasing the
last added call. Valid values are
in the form Rd, where d is 0-9, *,
or #. The default is an empty
string. You can only configure
the parameter when the
enable_etsi parameter is set to
true.
All lines of I-240W-S ONT should
be configured the same (* and #
are not supported on the
I-240W-S ONT).
enable_3wc_focus Specifies the behavior of the
ONT when generating contact
name in an INVITE of a second
call. The options are:
•
•
When set to true, the ONT
appends 3WC to the contact
name and adds the isfocus
header. If the three-way call is
reduced to a two-way call, a
re-invite is sent to remove the
isfocus.
When set to false, the ONT does
not append 3WC to the contact
name and does not add an isfocus
header to the invite message.
You can configure the parameter
when the enable_etsi parameter
is set to true
prefer_early_media Specifies whether to continue to
output early media to a user
even after the ONT receives a
180 ringing response.
The options are:
•
•
This parameter is available in
XML releases R4.1 and 4.3, but
not R4.2.
All lines of I-240W-S ONT should
be configured the same.
(27 of 30)
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
true (default)
false
True/1/Yes to ignore the 180
ringing response
(default) False/0/No to
suppress the early media
session and play a local
ringback tone
Mode Mode Device
1 2
Y Y All
except
package
C, D,
and E
N Y All
except
package
C, D, E,
and
I-240W-
S ONT
N Y All
except
package
C, D,
and E
November 2013
5 — VoIP overview
OMCIv2 TL1 or CLI
support? parameters
No, value is N/A
derived
from
FTP/default
line profile.
No, value is N/A
derived
from
FTP/default
line profile.
No, value is N/A
derived
from
FTP/default
line profile.
5-69