Alcatel-Lucent 7302 Information Manual page 358

5 — VoIP overview
Service
Message waiting
indication (MWI)
Outbound call dialing (1)
(2)
Bridged lines (1) (2)
Call pickup with Barge-in
(1) (2)
Suppressed ringing (1) (2)
Multiple SIP accounts (1)
(2)
(3 of 3)
Notes
(1) Not supported on package C and D ONTs
(2)
Not supported on I-240W-S ONTs.
(3) I-240W-S and I-241W-S ONTs do not support consultative call waiting (*52).
Subscriber service codes for SIP mode 2
In SIP mode 2, the ONT supports service-feature related codes that are configurable
in some ONTs (not supported for package C, D, and I-240W-S ONTs), including the
following:
•
*70 or 1170 to cancel call waiting for the duration of the current call
•
*52 or 1152 after a flash hook to place the remote party on hold
•
*54 or 1154, or *53 or 1153 to activate home intercom
•
*41 or 1141 to initiate a 6-way conference call, or cause a consultation call to be
joined to an active 6-way conference
•
*43 or 1143 to release a consultation call instead of joining it to a 6-way
conference
•
*43# to activate call waiting service (ETSI)
•
#43# to deactivate call waiting service (ETSI)
•
*#43# to interrogate call waiting service activation status (ETSI)
By default, the subscriber invokes features such as 3-way calling or call waiting
using the methods described in the Bellcore GRs. However, some ONTs that support
SIP voice service also support ETSI market-based methods of invoking calling
features when the enable_etsi SIP parameter in Table
parameter allows for different subscriber call feature controls, as shown in Table 5-3.
This is not supported on package C and D ONTs.
5-12 November 2013
Description
Audible and visual MWI when a subscriber
has voice mail message waiting,
including:
Reminder ring (2)
Stutter dial tone
Visual MWI
Part of basic call
Two or more lines sharing the same
directory number
Allows a third party to join a two-way
call
Supports specialized telemetry devices
used in place of standard phone sets
As many as 10 registrations are allowed
for each POTS line
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
SIP SIP OMCIv2
mode 1 mode 2
Specific feature details
such as
vmwi_refresh_interval,
Y Y
vmwi_abbreviated_ring,
Y Y mwi_reminder_burst, and
mwi_reminder_interval
Y Y
must be configured using
XML. (2)
Y Y Fully configurable
— Y
— Y
— Y Not configurable, must use
enable_supp_ring XML
parameter.
— Y
5-14 is set to yes. Enabling this
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide