Veip And The Relationship To Tr-069; Restrictions To Configure An Ont Veip Port - Alcatel-Lucent 7302 Information Manual

5 — VoIP overview
The VEIP is the boundary point between the OMCI domain and the TR-069 domain.
Beyond the VEIP, voice services or other functionality is managed by the CWMP
per the TR-069 standard. The L3 functions of devices that support L3 can be
managed via home management systems (ACS or HDM) defined by TR-069 or by
web-based GUIs.
This VEIP managed entity represents the handoff point in an ONT or MDU to a
separate, non-OMCI management domain. One or more Ethernet traffic flows are
present at this boundary.
Figure
The ONT must support TR-069 configuration via a third-party manager.
Table
Task
Create an ONT VEIP port
(1 of 2)
5-16 November 2013
5-5 shows the relationship between the OMCI and non-OMCI domains.
Figure 5-5 VEIP and the relationship to TR-069
Telco
OLT
Enable data connection
Physical POTS maintenance
Via OMCI
VEIP
ONT SIP client
5-4 identifies the restrictions that apply.
Table 5-4 Restrictions to configure an ONT VEIP port
Restriction
The ONT card must be created
The QoS session profile must be created.
The DSCP to p-bit mapping profile must exist, if a non-default
profile is specified.
Up to 16 VEIPs can be configured on an ONTCARD.
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Access
Seeker
ACS
VoIP parameters provisioning
Through TR - 069
SIP UA Media
client client
IP client
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
22217