Alcatel-Lucent 7302 Information Manual page 503

XML parameter Parameter values
L3Port Specifies the Layer 3 LAN port in unsigned
long bit definition format.
Bit31~16 : 0
Bit15~8: wireless LAN port
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| bit15:~bit12:reserved | bit11:WLAN_4 |
bit10:WLAN_3 | bit9:WLAN_2 |
bit8:WLAN_1 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Bit7~0: LAN port
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| bit7:~bit4:reserved | bit3:LAN_4 |
bit2:LAN_3 | bit1:LAN_2 | bit0:LAN_1 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
default: 0;
1: enable;
LAN interface configuration
instanceID Specifies the instance ID. Set to 1 and
cannot be changed
LANName Specifies the LAN name, an alphanumeric
string of 1 to 256 characters
IpAddress Specifies the IPv4 address of the LAN
interface in dotted decimal notation
format.
SubnetMask Specifies the IP address subnet mask of the
LAN interface in dotted decimal format. The
default is 255.255.255.0.
DHCPSState Specifies whether DHCP is enabled or
disabled. The options are:
•
enable (default)
•
disable
StartIP Specifies the start and end range of the
DHCP IP address pool.
EndIP
Leasetime Specifies the client IP pool lease time, in
seconds. The range is 0 to 6048000. The
default is 259200 (72 hours). The maximum
is 70 days
Option60 Specifies the IP address for the device that
transits the DHCP discovery packets with
the matched option 60 functionality.
uPnP configuration
(3 of 6)
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
6 — ONT management using an ONT interface
Sample XML
<LANType L3Port="0"/>
<LANInterface
NumberOfInstance="1"
MaxNumber="2">
<LANInterfaceInstance
InstanceID="1"
LANName="Primary"
IpAddr="192.168.100.1"
SubnetMask="255.255.255.0"
DHCPServerEnable="enable"
StartIP="192.168.100.100"
EndIP="192.168.100.200"
Leasetime="259200"
Option60="dhcpOp"/>
</LANInterface>
November 2013
Information
—
—
—
—
—
When enabled,
the device
assigns IP
addresses, an IP
default
gateway, and
DNS servers.
—
—
—
6-71