Alcatel-Lucent 7302 Information Manual page 1068

NTP 161 — Replace an I-211M-K or I-211M-L indoor ONT
Figure NTP 161-3: I-211M-L indoor ONT connections inside a Just Inside enclosure
4 Replace the ONT with a new unit:
a
b
c
NTP 161-6 November 2013
Coaxial Ground Pots
cable wire cables
On a flat surface, such as a desk, substitute the replacement ONT for the old
ONT that is resting horizontally; go to step 5.
In a foot mount.
i Unsnap the foot mount from the channels built into the ONT to be
replaced and snap it onto the replacement ONT, ensuring it is securely
held.
ii Place the new ONT with foot mount vertically on a flat surface; go to
step 5.
On a wall.
i Slide the old ONT upward and then away from the four mounting screws
until the ONT is free of the wall.
ii Install the replacement ONT following the wall mounting instructions
for an I-211M-K indoor ONT (DLP 122).
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
System Status
Battery Power
Replace Battery
Auxillary Power
Silence
Alarm
Battery
Emergency Use
Ethernet
cable
POTS IDC
connector
Edition 01
ONT Product Information Guide
Power
cables
Locking
screw
Fiber optic
cables
22762
3FE 55873 AAAA TCZZA