Alcatel-Lucent 7302 Information Manual page 784

NTP 127 — Install an I-010G-Q or I-010G-S indoor ONT
9 If used, configure the SLID (DLP 129).
10 Verify the ONT LEDs, voltage status, and optical signal levels (DLP 127).
11 Activate and test the services (DLP 128).
12 If necessary, reset the ONT (DLP 126).
13 STOP. This procedure is complete.
NTP 127-4 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide