Procedure 6-19 To Check The Status Of Leds - Alcatel-Lucent 7302 Information Manual

Procedure 6-19 To check the status of LEDs

1 From the Web-Management System window, click on the States Management
tab, as shown in Figure 6-15.
The ONT status window opens with the ONT states and their current status, as
shown in Figure 6-10.
2 Click on the LED tab. The ONT LEDs window appears showing the LEDs, their
color, the current LED state, and the persistent LED state.
where
LED is the mnemonic for an LED on the ONT. Each LED represents a condition or activity on the
ONT, such as the condition of the battery or the activity of a data link; see Table
explanation of each LED.
COLOR is the color of the LED. The color of the LED represents the status of a condition or activity
on the ONT, such as red for failing battery or green for activity on the data link; see the
ONT-specific unit data sheet for the meaning of a color for a specific LED and ONT type.
CURSTATE represents the current LED state, where OFF means the LED is not lit, ON means that
the LED is lit and the color is solid.
PERSTATE represents the persistent state of the LED, where OFF means that the LED was not lit,
and ON means that the LED was lit and the color was solid.
3 Use the scroll bar in the ONT LEDs window to scroll up and down the list of LEDs.
4 Click on the Refresh button to refresh the contents of the window.
5 STOP. This procedure is complete.
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Figure 6-15 Main options in Web-Management system window
Figure 6-16 ONT LEDs
6 — ONT management using an ONT interface
November 2013
6-8 for an
6-33