Alcatel-Lucent 7302 Information Manual page 392

Intelligent services access manager
Table of Contents

Advertisement

5 — VoIP overview
Parameter
Description
service_code_ccw
A set of one or more service
codes, such as *70, that the user
agent recognizes as the Cancel
Call Waiting service code. This
reflects that fact that in typical
dial plans there are two
equivalent ways to dial a given
service code. This is a string. The
value of this property may
include up to two service codes
separated by white space. The
default is "*70 1170." In XML the
length can be up to 6 characters.
In TL1, the length can be up to 5
characters.
The same service code values
must be present in the digit map
with an 'S' modifier and no 'R'
modifier.
If a configured value also
appears in the digit map with an
S modifier then they will be
processed during dialing for the
associated feature. If the value
is not in the digit map with an S
modifier, then the digits will be
treated as normally dialed digits
and not be specially processed.
Use the appropriate enable_XXX
parameter to enable the service
code.
For other devices, the value is
"*70 1170 and cannot be
changed.
service_code_6wc
A set of one or more service
codes that the user agent
recognizes as a request to
initiate a six-way conference.
This reflects that fact that in
typical dial plans there are two
equivalent ways to dial a given
service code. This is a string. The
value of this property may
include two service codes, each
up to 6 characters long,
separated by white space. The
default is "*41 1141".
If a configured value also
appears in the digit map with an
S modifier then they will be
processed during dialing for the
associated feature. If the value
is not in the digit map with an S
modifier, then the digits will be
treated as normally dialed digits
and not be specially processed.
Use the appropriate enable_XXX
parameter to enable the service
code.
(4 of 30)
5-46
November 2013
Mode
1
N
N
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Mode
Device
OMCIv2
2
support?
Y
Package
Yes
A, B, H
only
Y
Package
No, value is
A, B, H
derived
only
from
FTP/default
line profile.
Edition 01
3FE 55873 AAAA TCZZA
ONT Product Information Guide
TL1 or CLI
parameters
TL1 using
CANCELWAIT
using
ent-profile-a
cccodes
CLI using
cancel-call-w
ait
using
configure
voice ont
feat-acccode
-prof
N/A

Advertisement

Table of Contents
loading

This manual is also suitable for:

73607330

Table of Contents