Alcatel-Lucent 7302 Information Manual page 569

4 Place the business ONT unit:
a
b
5 Place the business ONT unit on a flat surface, such as a desk, resting horizontally.
Go to step 9.
6 Wall-mount the outdoor enclosure for the B-0404G-B business ONT.
a
b
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
On a flat surface, go to step 5.
In an outdoor enclosure, go to step 6.
Open the access cover on the outdoor enclosure by loosening the pin-in-hex
screw.
Note — Observe the following:
The access cover of the outdoor enclosure must be open to access
•
the three mounting holes used to secure the outdoor enclosure to
the wall.
Secure the outdoor enclosure to the mounting area at the subscriber
premises. Use the appropriate hardware as defined by local installation
practices. Mount the outdoor enclosure using the specified mounting holes as
shown in Figure NTP 103-1.
NTP 103 — Install a B-0404G-B business ONT
November 2013 NTP 103-3