NTP 137 — Replace an I-011G-A,
Purpose
This NTP provides the steps to replace an I-011G-A, I-011G-B, I-110G-A, or I-111G-A
indoor ONT.
General
The steps listed in this NTP describe mounting and cabling for a replacement I-011G-A,
I-011G-B, I-110G-A, or I-111G-A indoor ONT.
Prerequisites
See the listed DLPs for prerequisites.
Recommended tools
You need the following tools for replacing the ONT:
screwdriver for wall mounting the ONT unit
•
Phillips screwdriver for connecting the SC/APC cable
•
voltmeter or multimeter
•
optical power meter
•
•
wall mounting template
drill and drill bits
•
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA
Edition 01
ONT Product Information Guide
I-011G-B, I-110G-A, or
I-111G-A indoor ONT
November 2013
NTP 137-1