I-010G-Q And I-010G-S Indoor Ont Connections (Front View); I-010G-Q And I-010G-S Indoor Ont Connections (Back View); I-010G-Q And I-010G-S Indoor Ont Physical Connections - Alcatel-Lucent 7302 Information Manual

Figures
indoor ONTs.
Table
ONTs.
Connection
Ethernet port
Fiber optic port
Power
Note
(1) The primary path for the earth ground for these ONTs is provided by the 12V Return signal in the
power connector.
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
17-1 and 17-2 show the physical connections for I-010G-Q and I-010G-S
Figure 17-1 I-010G-Q and I-010G-S indoor ONT connections (front view)
Figure 17-2 I-010G-Q and I-010G-S indoor ONT connections (back view)
Power
connector
Power
switch
SC/APC
Fiber optic
connector
17-4 describes the physical connections on I-010G-Q and I-010G-S indoor
Table 17-4 I-010G-Q and I-010G-S indoor ONT physical connections
(1) Description
This connection is provided through an Ethernet RJ-45 port. One
Ethernet connection is supported. The Ethernet port can support
voice, video, data, and high-speed Internet access.
This connection is provided through an SFF type laser fiber optic
cable with SC/APC connector and port with SC/APC adapter.
This connection is provided through a power cable with a barrel
connector to the power connector.
17 — I-010G-Q and I-010G-S unit data sheet
Ethernet
(ETH) RJ-45
November 2013
21149
21148
17-5