6 — ONT management using an ONT interface
Prerequisites
The prerequisites are:
•
The user access level of the ONT is read only or read-write.
•
The steps to access the interface are completed.
•
•
Procedures using HTTP interface
The following procedure provides the steps to check the ranging state of an ONT
using the HTTP interface.
Procedure 6-21 To check the ranging state of an ONT
1
Ensure that the ONT is connected to the GPON.
2
From the Web-Management System window, click on the States Management
tab, as shown in Figure 6-17.
The ONT status window opens with the ONT states and their current status, as
shown in Figure 6-10.
3
Click on the Ranging tab. The Ranging State window opens with the current
ranging state, as shown in Figure 6-18.
where the ranging states are described in Table
6-36
November 2013
See Procedure
6-1
for HTTP interface using the first Ethernet port.
See Procedure
6-4
for CLI interface using the first Ethernet port.
Figure 6-17 Main options in the Web-Management System window
Figure 6-18 Ranging State window
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
6-9
Edition 01
3FE 55873 AAAA TCZZA
ONT Product Information Guide