Restore Settings; Malfunctions - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

What to do if ... | System or power failure

Restore settings

22.2.2
Reinstalling the firmware resets the product to the factory defaults. This deletes
the setting, including the error compensation values and the activated software
options. Not affected by this are user files saved in the memory or files that are
retained after a firmware reinstallation.
To restore settings, you must either reconfigure them on the unit yourself or
restore previously backed up settings on the unit.
Software options that were active when the settings were backed up
must be activated before restoring the settings on the product.
Activating software options
Further information:
Restoring settings
Further information:
22.3

Malfunctions

If faults or malfunctions that are not listed in the "Troubleshooting" table below
occur during operation, refer to the machine tool builder's documentation or
contact a HEIDENHAIN service agency.
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
"Activating the Software options", Page 109
"Restore settings", Page 364
22
369