Executing Blocks - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

Turning – MDI mode | Executing blocks
14.4

Executing blocks

You can select a positioning function and execute this block.
If enabling signals are missing, the running program is halted and the
drives of the machine are stopped.
Further information:
Executing blocks
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
Manufacturer's documentation for the machine
Tap Create on the status bar
A new block is displayed
or
The last programmed MDI block with all parameters is loaded
Select the desired block type in the Block type drop-down
list
Define the relevant parameters, depending on the block type
To load the current axis position, tap Actual position capture
in the appropriate input fields
Confirm each entry with RET
To run the block, tap END
The positioning aid is displayed
If the simulation window is active, the current block is
visualized
User intervention may be required, depending on the block;
the wizard will display the relevant instructions
Follow the instructions of the wizard
If the product or the machine tool has NC-controlled axes, tap
or press the NC START key
With multi-step blocks, such as machining patterns, tap Next
to proceed to the next step in the wizard
14
245