Using The Program; Example Of A Program In The Program Run Operating Mode - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

Milling – Program run | Using the program
15.2

Using the program

The screen shows a loaded program with the blocks and, if applicable, with the
individual work steps of the blocks.
If enabling signals are missing, the running program is halted and the
drives of the machine are stopped.
Further information:
Requirement:
The appropriate workpiece and tool have been clamped
A program file of the *.i type has been loaded
Further information:
Figure 71: Example of a program in the Program run operating mode
1 View bar
2 Simulation window (optional)
3 Distance-to-go display
4 Toolbar
5 Program blocks
6 Spindle speed (machine tool)
7 Program management
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
Manufacturer's documentation for the machine
"Managing programs", Page 258
1 2 3
7 6
4
5
253
15