Calling Functions Of The Oem Bar - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

Basic operation | OEM bar

Calling functions of the OEM bar

6.11.2
The operating elements that are available on the OEM bar depend on
the configuration of the device and of the connected machine tool.
Further information:
The operating elements in the OEM bar allow you to control special functions (e.g.,
spindle functions).
Further information:
Setting spindle speed
Programming spindle speed
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
"Configuring the OEM bar", Page 130
"Configuring special functions", Page 133
Tap the Spindle speed field on the OEM bar
The product applies the predefined voltage value at which
the spindle of the connected machine tool is brought to the
selected rotational speed (with no load on the spindle)
Tap or long-press + or – to bring the spindle to the desired
rotational speed
Long-press the desired Spindle speed field on the OEM bar
The background color of the field is highlighted in green
The product applies the current spindle speed as the nominal
value and displays it in the Spindle speed field
6
99