Connecting Input Devices; Connecting A Network Peripheral - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

5
5.8

Connecting input devices

Comply with the pin layout
Remove and save the dust protection caps
Route the cables based on the mounting variant
Further information:
Connect USB mouse or USB keyboard to USB Type-A port (X31, X32, X33,
X34). Make sure the USB cable connector is fully inserted
Further information:
Pin layout X31, X32, X33, X34
4 3 2
DC 5 V
5.9

Connecting a network peripheral

Note the following pin layout
Remove and save the dust protection caps
Route the cables depending on the mounting variant
Further information:
Connect the network peripheral to Ethernet port X116 using a standard CAT.5
cable. The cable connector must firmly engage in the port
Further information:
Pin layout of X116
1 2 3 4 5 6 7 8
1
D1+
(TX+)
60
"Assembly of the product", Page 42
"Product overview", Page 50
1
1 2
Data (–)
"Assembly of the product", Page 42
"Product overview", Page 50
2 3
D1– D2+ D3+
(TX–) (RX+)
3
Data (+)
4 5 6
D3– D2–
(RX–)
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
Installation | Connecting input devices
4
GND
7 8
D4+ D4–