22
Fault
The unit starts in recovery
mode (text only mode)
User login is not possible
372
Cause of fault
Correction of fault
Firmware error during
startup
Password does not
exist
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
What to do if ... | Malfunctions
If this fault occurs for
the first time, switch the
product off and then on
again
If the fault recurs, contact
a HEIDENHAIN service
agency
As user with higher
permission level, reset the
password
Page 150
To reset the OEM
password, contact the
HEIDENHAIN service
agency
Personnel
Qualified
personnel
Qualified
personnel