Using The Simulation Window; Example Of A Block In The Mdi Mode - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

13
Figure 59: Example of a block in the MDI mode
1 Wizard
2 View bar
3 Distance-to-go display
4 MDI block
5 Status bar
6 NC START key
7 Positioning aid
8 Spindle speed (machine tool)
13.4

Using the simulation window

You can display a visualization of the selected block in the optional simulation
window.
The following options are available on the view bar:
Operating element
236
With multi-step blocks, such as machining patterns, tap Next
to proceed to the next step in the wizard
1 3
2
8
7
Function
Graphic
Display of simulation and blocks
Graphic-Position
Display of simulation, parameters (position values for
program run, if required) and blocks
Position
Display of parameters (position values for program run,
if required) and blocks
Milling – MDI mode | Using the simulation window
4
6
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
5