Applying The Scaling Factor; Setting The Spindle Speed - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

Milling – Program run | Using the program
Activating the simulation window
Modifying the contour view

Applying the Scaling factor

15.2.5
If a scaling factor is activated for one or more axes, this scaling factor is multiplied
by the stored nominal position during execution of a block. This enables you to
mirror and scale a block.
You can activate a scaling factor in the quick access menu.
Further information:
If the calculated dimensions cannot be attained with the selected tool,
the execution of the block is aborted.
The scaling factor cannot be changed during execution of a block.
15.2.6

Setting the spindle speed

You can control the spindle speed depending on the configuration of the
connected machine tool.
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
Tap Graphic-Position
The simulation window for the currently selected block
appears
Tap Graphic on the view bar to enlarge the simulation
window
The parameter view is hidden and the simulation window is
enlarged
Tap Detail view
The detail view shows the tool path and the possible
machining positions for the currently selected block
Tap Overview
The overview shows the entire workpiece
"Adjusting settings in the quick access menu", Page 94
Tap or long-press + or – to set the spindle speed to the
desired value
or
Tap the Spindle speed input field, enter the value and tap
RET to confirm
The product applies the entered spindle speed as the
nominal value and controls the spindle of the machine tool
accordingly
15
257