Oem Area; Adding Documentation - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

Commissioning | OEM area

OEM area

7.4
In the OEM area, commissioning engineers can customize the product in various
ways:
Documentation: Adding the OEM documentation, e.g. service information
Startup screen: Defining a startup screen with the OEM's company logo
OEM bar: Configuring an OEM bar with specific functions
Settings: Selecting the application, adjusting the display elements and
messages
Screenshots: Configuring the unit for screenshots with the program Screen-
shotClient
7.4.1

Adding documentation

You can store and display the product's documentation right on the product.
Only documents in the *.pdf file format can be added as a
documentation. The product does not display documents provided in
other file formats.
Further information:
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
Tap Settings in the main menu
Tap Service
Open in the sequence
OEM area
Documentation
Add OEM service info
If required, connect a USB mass storage device (FAT32
format) to a USB port of the product
To navigate to the desired file, tap the location where the file
is stored
If you have accidentally tapped the wrong folder, you
can return to the previous folder.
Tap the file name that is displayed above the
list
Navigate to the folder containing the file
Tap the file name
Tap Select
The file is copied to the unit's Service info area
Further information: "Service info", Page 313
Confirm the successful transfer with OK
"Documentation", Page 356
7
127