Boring The Through Hole - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

9
9.5.2

Boring the through hole

184
Milling – Quick Start | Machining a through hole (manual operation mode)
On the machine tool, insert the Ø 19.8 mm drill into the
spindle
Tap Tools on the status bar
The Tools dialog appears
Tap Drill 19.8
Tap Confirm
The associated tool parameters are applied automatically
The Tools dialog is closed
On the product, set a spindle speed of 400 rpm
Bore the through hole and retract the spindle
You have successfully bored the through hole
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018