Requirements - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

9
9.3

Requirements

To manufacture the aluminum flange, use a manually operated or NC-controlled
machine tool. The following dimensioned technical drawing is available for the
flange:
Figure 36: Example workpiece– technical drawing
Machine tool
The machine tool is switched on
A pre-processed workpiece blank is clamped on the machine tool
Product
A spindle axis is configured
The axes have been homed
Further information:
A HEIDENHAINKT 130 Edge Finder is available
180
100
90±0.05
80±0.1
Ø50±0.05
"Conducting the reference mark search", Page 213
Milling – Quick Start | Requirements
A-A
20
13
10
1x45°
6
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018