HEIDENHAIN POSITIP 8000 Operating Instructions Manual page 132

7
Configuring M functions
On the OEM bar, you can define menu items that control the use of M functions
depending on the configuration of the machine tool.
Configuring M functions
Further information:
132
The manufacturer-specific M functions M100 to M120 are only available
if the connected output has been previously configured.
Further information: "Configuring M functions", Page 330
Tap Settings in the main menu.
Tap Service
Open in the sequence
OEM area
OEM bar
Bar items
Tap Add
Tap the Description input field
Enter a description for the menu item
Confirm the entry with RET
Tap M function in the Type drop-down list
Enter the number into the Number of the M function input
field:
100.T ... 120.T (TOGGLE switches between the states
when tapped)
100.P ... 120.P (PULSE outputs a short pulse when
activated; it can be extended by setting the Pulse time)
Confirm the entry with RET
For every M function, you can also define corresponding
images for displaying the status using Select image for
active function and Select image for inactive function
"M function OEM bar item", Page 352
Commissioning | OEM area
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018