HEIDENHAIN POSITIP 8000 Operating Instructions Manual page 162

8
Modifying the resolution and paper size for a printer
Further information:
Removing a printer
162
Tap Settings in the main menu
Tap General
Tap Printers
If multiple default printers have been set up for the product,
select the desired printer in the Default printer drop-down
list
Tap Properties
Tap Resolution to set the printer resolution
The resolutions provided by the driver are displayed
Select the resolution
Tap Resolution once again
Tap Paper size to set the paper size
The paper sizes provided by the driver are displayed
Select the paper size
The entered values are saved as defaults
Depending on the type of printer, select further values such as type of
paper or duplex print under Properties
"Printers", Page 309
Tap Settings in the main menu
Tap General
Open in the sequence:
Printers
Remove printer
In the Printers drop-down list, select the printer you no
longer need
The model, location and connection of the printer are
displayed
Tap Remove
Confirm with OK
The printer is removed from the list and can no longer be
used
Setup | Single steps for setup
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018