Reaming The Fit - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

Milling – Quick Start | Machining a fit (MDI mode of operation)
9.7.2

Reaming the fit

HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
On the machine tool, insert the Ø 20 mm H6 reamer into the
spindle
If the product or the machine tool has NC-controlled axes, tap
or press the NC START key
On the product, set a spindle speed of 250 rpm
Start the machining process—follow the instructions of the
wizard
Tap Close
Program run is terminated
The wizard closes
You have successfully machined the fit
9
189