Milling – Programming | Block types
17.2.4
Machining patterns
You can define various machining patterns to machine complex shapes. From the
data you enter, the product calculates the geometry of the machining patterns and
optionally displays them in the simulation window.
Before defining a machining pattern, you must
Define a suitable tool in the tool table
Select the tool on the status bar
Further information:
You can load the current axis position with Actual position capture into
the appropriate input fields.
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
"Creating a tool table", Page 164
17
273