18
18.4.2
Activating the simulation window
18.4.3
Checking a program in the simulation window
290
Tap Graphic-Form
The simulation window for the currently selected block
appears
Tap Graphic on the view bar to enlarge the simulation
window
The parameter view is hidden and the simulation window is
enlarged
Tap Graphic
The simulation window for the current program appears
Tap each program block, one after the other
The program steps are displayed in the simulation window;
you can enlarge the detail view as needed
Tap Detail view to enlarge
Tap Overview to show the overall view
Turning – Programming | Using the simulation window
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018