Using The Program - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

16
16.2

Using the program

The screen shows a loaded program with the blocks and, if applicable, with the
individual work steps of the blocks.
Requirement:
The appropriate workpiece and tool have been clamped
A program file of the *.i type has been loaded
Further information:
Figure 73: Example of a program in the Program run operating mode
1 View bar
2 Simulation window (optional)
3 Distance-to-go display
4 Toolbar
5 Program blocks
6 Spindle speed (machine tool)
7 Program management
262
If enabling signals are missing, the running program is halted and the
drives of the machine are stopped.
Further information: Manufacturer's documentation for the machine
"Managing programs", Page 258
1
7
Turning – Program run | Using the program
2 3
6
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
4
5