Display - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

Settings | General

Display

20.2.3
Settings ► General ► Display
Path:
Parameter
Position display
Position values
Distance-to-go indicator
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
Explanation
Configuration of the position display in the MDI mode and
Program Run operating mode. The configuration also deter-
mines the actions requested by the wizard in the MDI mode and
Program Run operating mode:
Position with distance to go – the wizard requests traversing
the axis to the displayed position.
Distance to go with position – the wizard requests traversing
the axis to 0 and a positioning aid is shown.
Settings:
Position: The position is displayed large
Position with distance to go: The position is displayed large
and the distance to go is displayed small
Distance to go with position: The distance to go is displayed
large and the position is displayed small
Default setting: Distance to go with position
The position values can describe the actual values or nominal
values of the axes.
Settings:
Actual value
Nominal value
Default setting: Actual value
Display of the distance-to-go indicator in MDI mode
Settings: ON or OFF
Default value: ON
20
305