Turning – Quick Start | Requirements
10.3
Requirements
Use a manually operated lathe to machine the bearing seat. The following
dimensioned technical drawing is available for the bearing seat:
2
Figure 46: Example workpiece – technical drawing
Lathe
The lathe is switched on
A workpiece blank with Ø 24 mm is clamped into the lathe
Product
The axes have been homed
Further information:
Tools
The following tools are available:
Roughing tool
Finishing tool
Recessing tool (1 mm)
Turning chisel (45°)
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
16
13.3
1.3 H13
1 x 45°
"Conducting the reference mark search", Page 213
10
201