Overview; Logging In For Quick Start - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

10
10.1

Overview

This chapter describes the production of an example workpiece. This chapter
will guide you step by step through the unit's various machining options as you
machine the example workpiece. For successful machining of the bearing seat,
you will need to perform the following machining steps:
Machining step
Setting up the lathe
Roughing the outside contour
Turning the recesses
Finishing the outside contour
Figure 45: Example workpiece
10.2

Logging in for Quick Start

User login
For Quick Start, the Operator user must log in.
200
Make sure that you have read and understood the "Basic operation"
chapter before carrying out the actions described below.
Further information: "Basic operation", Page 63
Tap User login in the main menu
If required, log out the user who is currently logged in
Select the Operator user
Tap the Password input field
Enter the password "operator"
If the password does not match the default
password, ask a Setup user or OEM user for the
assigned password.
If the password is no longer known, contact a
HEIDENHAIN service agency.
Confirm entry with RET
Tap Log in
Mode of operation
Manual operation
Manual operation
Manual operation
Manual operation
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
Turning – Quick Start | Overview