HEIDENHAIN POSITIP 8000 Operating Instructions Manual page 90

6
Coupling axes
Z
+Z
Decoupling axes
Z
Setting the spindle speed
You can control the spindle speed depending on the configuration of the
connected machine tool.
90
In the working space, drag the Z axis key to the right
Tap Couple
The Zo axis is now coupled with the Z axis
The icon for the coupled axes is shown next to the Z axis key
The position value for the coupled axes is shown as a sum
In the working space, drag the Z axis key to the right
Tap Decouple
The position value of both axes are shown independently of
each other
Tap or long-press + or – to set the spindle speed to the
desired value
or
Tap the Spindle speed input field, enter the value and tap
RET to confirm
The product applies the entered spindle speed as the
nominal value and controls the spindle of the machine tool
accordingly
Basic operation | Position display
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018