Symbols And Fonts Used For Marking Text - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

1
1.5.6

Symbols and fonts used for marking text

In these instructions the following symbols and fonts are used for marking text:
Depiction
...
...
...
...
Bold
28
Meaning
Identifies an action and the result of this action
Example:
Tap OK
The message is closed
Identifies an item of a list
Example:
TTL interface
EnDat interface
...
Identifies menus, displays and buttons
Example:
Tap Shut down
The operating system shuts down
Turn the power switch off
Fundamentals | About these instructions
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018