HEIDENHAIN POSITIP 8000 Operating Instructions Manual page 161

Setup | Single steps for setup
Enhanced printer settings
Using CUPS
For printer control the product uses the Common Unix Printing System (CUPS). In
the network, CUPS enables connected printers to be set up and managed using a
web interface. These functions depend on whether the product uses a USB printer
or network printer.
The CUPS web interface enables you to configure the enhanced settings of the
printer connected to the product. You can also use this web interface if printer
setup via the product fails.
Requirement:
Further information:
See the Online Help tab for detailed information about the CUPS web
interface.
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
The product is connected to a network.
"Connecting a network peripheral", Page 60
Tap Settings in the main menu
Tap Interfaces
Tap Network
Tap the X116 interface
Specify and write down the IP address of the product from
IPv4 address
On a computer in the network, call the web interface of
CUPS via the following URL:
http://[IP address of the product]:631
(e.g. http://10.6.225.86:631)
In the web interface, click on the Administration tab and
select the desired action
8
161