HEIDENHAIN POSITIP 8000 Operating Instructions Manual page 92

6
Setting the spindle mode (in the Turning application mode)
In the Turning application mode, you can decide whether the unit uses the
standard speed mode or CSS (constant surface speed) for the spindle mode.
In the CSS spindle mode, the unit calculates the spindle speed such that the
surface speed of the turning tool remains constant regardless of the workpiece
geometry.
Activating the CSS spindle mode
S
Activating the speed mode
S
92
In the working space, drag the S axis key to the right
Tap CSS mode
The Activate CSS dialog appears
Enter the value for Maximum spindle speed
Tap Confirm
The CSS spindle mode is activated
The spindle speed is shown in the unit of measure m/min
Drag the S axis key to the left
The icon for the CSS spindle mode appears next to the S axis
key
In the working space, drag the S axis key to the right
Tap Speed mode
The Activate speed mode dialog appears
Enter the value for Maximum spindle speed
Tap Confirm
The speed mode is activated
The spindle speed is shown in the unit of measure rpm
Drag the S axis key to the left
Basic operation | Position display
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018