Basic operation | User interface
In the Programming menu, you can create and manage programs. You define
individual machining steps or machining patterns as blocks. A sequence of blocks
then forms a program.
Further information:
Further information:
6.8.7
File management menu
Activation
Short description
1
Figure 26: File management menu
1
List of available storage locations
2
List of folders in the selected storage location
The File management menu shows an overview of the files stored in the
product's memory.
If USB mass storage devices (FAT32 format) are connected or network drives
are available, they are displayed in the list of storage locations. The USB mass
storage devices and the network drives are displayed with their names or drive
designations.
Further information:
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
"Milling Programming", Page 269
"Turning Programming", Page 281
Tap File management in the main menu
The user interface for file management is displayed
"File management", Page 293
2
85
6