Overview - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

8
8.1

Overview

This chapter contains all the information necessary for setting up the product.
During setup, the setup engineer (Setup) configures the product for use on the
machine tool in the respective applications. This includes, for example, setting up
operators and creating preset tables and tool tables.
146
Make sure that you have read and understood the "Basic operation"
chapter before carrying out the actions described below.
Further information: "Basic operation", Page 63
The following steps must be performed only by qualified personnel.
Further information: "Personnel qualification", Page 31
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
Setup | Overview