Overview - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

18
18.1

Overview

This chapter describes the Programming mode of operation and how to create
new programs and edit existing programs in this mode.
Short description
The product uses programs for recurring tasks. To create a program you define
various blocks, such as positioning functions or machine functions. The program
is then created from the sequence of blocks. You can save a maximum of 1000
blocks in a program.
Activation
Figure 78: Programming menu
1 View bar
2 Toolbar
3 Program management
282
Make sure that you have read and understood the "Basic operation"
chapter before carrying out the actions described below.
Further information: "Basic operation", Page 63
Programming does not require connecting the product to a machine
tool.
Tap Programming in the main menu
The user interface for programming is displayed
1
3
The status bar and the optional OEM bar are not available in the
Programming menu.
Turning – Programming | Overview
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
2