Switch-Off Menu; Position Display; Operating Elements Of The Position Display - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

6
6.8.10

Switch-off menu

Activation
Short description
The Switch off menu provides the following options:
Operating
element
Further information:
Further information:
6.9

Position display

The unit's position display shows the axis positions and additional information
about the configured axes (if applicable).
You can also couple the display of axes and have access to the spindle functions.
6.9.1

Operating elements of the position display

Symbol
X
X
R
88
Tap Switch off in the main menu
The operating elements for shutting down the operating
system, for activating the energy-saving mode and for
activating the cleaning mode are displayed
Function
Shut down
Shuts down the operating system
Energy saving mode
Switches the screen off and puts the operating system into
energy-saving mode
Cleaning mode
Switches the screen off; the operating system continues
unchanged
"POSITIP 8000 – switch-on and switch-off", Page 69
"", Page 360
Meaning
Axis key
Axis key functions:
Tapping the axis key: opens input field for position value
(Manual mode) or dialog MDI block (MDI mode)
Holding down the axis key: sets the current position as zero
point
Dragging the axis key to the right: opens menu if functions
are available for the axis
In the turning application mode: The position display shows the
diameter of the radial machining axis X
Further information: "Display", Page 305
Reference mark search performed successfully
Basic operation | User interface
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018