Depiction As Contour View - HEIDENHAIN POSITIP 8000 Operating Instructions Manual

Milling – MDI mode | Using the simulation window
13.4.1

Depiction as contour view

The simulation window displays a contour view. The contour view provides the
necessary feedback for precisely positioning the tool or for following a contour
along the machining plane.
The contour view uses the following colors (defaults):
Figure 60: Simulation window with contour view
1 Machining pattern (white)
2 Current block or machining position (green)
3 Tool contour, tool position and tool path (orange)
HEIDENHAIN | POSITIP 8000 | Operating Instructions | 09/2018
1
2
3
13
237